MICROFLON® TREATMENTS
A REVOLUTION
IN SURFACE TREATMENTS

A HIGH-PERFORMANCE TECHNIQUE
IN FLUOROPOLYMER COATINGS

MICROFLON® COATINGS
MAXIMUM DIMENSIONS OF THE PARTS 1500x1500x4500 MM

AN ALMOST 50 YEAR-OLD EXPERIENCEA QUALITY ASSURANCEA HIGH-PERFORMANCE TECHNIQUERESPECT FOR DEADLINESPEOPLE WHO ARE ATTENTIVE TO YOUR NEEDSCONCRETE SOLUTIONS

MICROFLON® COATINGS
MAXIMUM DIMENSIONS OF THE PARTS
1500x1500x4500 MM

AN ALMOST 50 YEAR-OLD EXPERIENCEA QUALITY ASSURANCEA HIGH-PERFORMANCE TECHNIQUERESPECT FOR DEADLINESPEOPLE WHO ARE ATTENTIVE TO YOUR NEEDSCONCRETE SOLUTIONS

MICROFLON®
COATING

Process: Wet process
Penetration: max. 5 microns
Thickness: 2 to 3 microns
Coefficient of friction: 0.03-0.015

OTHER
COATINGS

Microflon, Hostaflon,
PTFE (Téflon)
FEP, PFA, XYLAN,
HALAR, TEFZEL, MOLYCOTE.

Microflon - Traitement de surface - Revêtements PTFE Teflon, alimentaire, Hostaflon, FEP, PFA, Fluorimid, Fluoref, Deltaflon, transformation en semi-produits...

AUTOLUBRIFICATION

Friction coefficients can fall down to 0.02. The phenomena of bonding, either metal-metal (fretting corrosion), or rubber-metal (stick-slip) in aeronautics and hydraulics are solved.
Microflon - Traitement de surface - Revêtements PTFE Teflon, alimentaire, Hostaflon, FEP, PFA, Fluorimid, Fluoref, Deltaflon, transformation en semi-produits...

ELECTRICAL INSULATION

Fluoropolymers can have an electrical insulation function and can also solve galvanic couple problems.
Microflon - Traitement de surface - Revêtements PTFE Teflon, alimentaire, Hostaflon, FEP, PFA, Fluorimid, Fluoref, Deltaflon, transformation en semi-produits...

ANTI-ADHESION

MICROFLON® has lubricating and anti-adhesive properties, and it can either be self-sufficient, or complement conventional lubricants.
Microflon - Traitement de surface - Revêtements PTFE Teflon, alimentaire, Hostaflon, FEP, PFA, Fluorimid, Fluoref, Deltaflon, transformation en semi-produits...

FRETTING CORROSION

Our means of reducing this corrosion are through the use of self-lubricating coatings; friction is thus reduced and oxygen is excluded from the surface.
Microflon - Traitement de surface - Revêtements PTFE Teflon, alimentaire, Hostaflon, FEP, PFA, Fluorimid, Fluoref, Deltaflon, transformation en semi-produits...

ANTI-CORROSION

Our resins are particularly designed for the production of anti-corrosion coatings for the chemical sector: tanks, stirrers, etc.

OUR POSSIBILITIES

COATINGS
Microflon, Hostaflon, PTFE (Téflon)

FEP, PFA, XYLAN, HALAR, TEFZEL, MOLYCOTE.

MAXIMUM DIMENSIONS OF THE PARTS
1500 x 1500 x 4500 mm

PROCESSING OF FLUORORESINS AND MACHINING OF SEMI-FINISHED PRODUTCS
Microflon® coatings (Fluorotechnique registered trademark) :
Fluoropolymer coating (PTFE/FEP/PFA) in thin layers: 3µ +/1µ for mechanical parts
in the sectors or space, armament, aeronautics and nuclear.

LINES OF BUSINESS

SPATIALAERONAUTICSAVIONICSELECTRONICSARMAMENTSNUCLEARCHEMISTRYFOODMEDICALPRINTING

Microflon - Traitement de surface - Revêtements PTFE Teflon, alimentaire, Hostaflon, FEP, PFA, Fluorimid, Fluoref, Deltaflon, transformation en semi-produits...
Microflon - Traitement de surface - Revêtements PTFE Teflon, alimentaire, Hostaflon, FEP, PFA, Fluorimid, Fluoref, Deltaflon, transformation en semi-produits...

In general any dry or lubricated part for which
we want to increase durability, speed, performance,
or for which we want to delay seizure or bonding.

MICROFLON® PROCESS and CHARACTERISTICS

Surface coatings made by fluoropolymer spraying (Teflon® PTFE, FEP…) in a wet process, in very thin layers on metallic materials. The products penetrates into the metal down to a maximal depth of 5 microns (substrate porosity is obtained mechanically)
on finished pieces without remanufacturing after coating.The obtained allowance can go from 2 to 30 microns depending on the intended objective.

Application after micro sandblasting to finally obtain pure Teflon coatings resulting in allowances that start at 3µ+/-1µ. It is even possible to adjust parts with a zero-clearance fit (bushel for aeronautics or space industries).

FRICTION COEFFICIENT: From 0,03 to 0,15

IMPORTANT
Low-temperature coating is possible (e.g. copper parts or elastomer). Some coatings need a thermal stabilization to avoid any post-treatment deformation.
A hardening treatment is recommended, since it allows an increase in the durability of the Microflon® process.

OUR REFERENCES

THEY TRUST US

CONTACT

INFORMATIONDOCUMENTATIONSALES QUOTATIONS RECEPTION OF PARTSTREATMENTRESHIPPINGREMOVALS

FLUOROTECHNIQUE
(Département MICROFLON®)

2, avenue du Président Salvador Allende
Z.I. Mozinor
93106 MONTREUIL CEDEX FRANCE
Tél. : +33 (0)1 48 58 73 13 – Fax : +33 (0)1 48 58 81 85
contact@microflon.fr

Write us
contact@microflon.com

You have the right to access, modify, rectify and delete data concerning you.
(Art. 34 of the “Informatique et Libertés” law of January 6, 1978). To exercise this right, contact us.