MICROFLON® TREATMENTS A REVOLUTION IN SURFACE TREATMENTS
A HIGH-PERFORMANCE TECHNIQUE IN FLUOROPOLYMER COATINGS
MICROFLON® COATINGS
MAXIMUM DIMENSIONS OF THE PARTS 1500x1500x4500 MM
Penetration: max. 5 microns
Thickness: 2 to 3 microns
Coefficient of friction: 0.03-0.015
PTFE (Téflon)
FEP, PFA, XYLAN,
HALAR, TEFZEL, MOLYCOTE.
AUTOLUBRIFICATION
Friction coefficients can fall down to 0.02. The phenomena of bonding, either metal-metal (fretting corrosion), or rubber-metal (stick-slip) in aeronautics and hydraulics are solved.
ELECTRICAL INSULATION
Fluoropolymers can have an electrical insulation function and can also solve galvanic couple problems.
ANTI-ADHESION
MICROFLON® has lubricating and anti-adhesive properties, and it can either be self-sufficient, or complement conventional lubricants.
FRETTING CORROSION
Our means of reducing this corrosion are through the use of self-lubricating coatings; friction is thus reduced and oxygen is excluded from the surface.
ANTI-CORROSION
Nos résines sont tout particulièrement conçues pour la réalisation de revêtements antOur resins are particularly designed for the production of anti-corrosion coatings for the chemical sector: tanks, stirrers, etc.
OUR POSSIBILITIES
COATINGS
Microflon, Hostaflon, PTFE (Téflon) FEP, PFA, XYLAN, HALAR, TEFZEL, MOLYCOTE.
MAXIMUM DIMENSIONS OF THE PARTS
1500 x 1500 x 4500 mm
PROCESSING OF FLUORORESINS AND MACHINING OF SEMI-FINISHED PRODUTCS
Microflon® coatings (Fluorotechnique registered trademark) : Fluoropolymer coating (PTFE/FEP/PFA) in thin layers: 3µ +/1µ for mechanical parts in the sectors or space, armament, aeronautics and nuclear.
LINES OF BUSINESS
In general any dry or lubricated part for which we want to increase durability, speed, performance, or for which we want to delay seizure or bonding.
MICROFLON® PROCESS and CHARACTERISTICS
Surface coatings made by fluoropolymer spraying (Teflon® PTFE, FEP…) in a wet process, in very thin layers on metallic materials. The products penetrates into the metal down to a maximal depth of 5 microns (substrate porosity is obtained mechanically) on finished pieces without remanufacturing after coating.The obtained allowance can go from 2 to 30 microns depending on the intended objective. Application after micro sandblasting to finally obtain pure Teflon coatings resulting in allowances that start at 3µ+/-1µ. It is even possible to adjust parts with a zero-clearance fit (bushel for aeronautics or space industries).
FRICTION COEFFICIENT: From 0,03 to 0,15
IMPORTANT
Low-temperature coating is possible (e.g. copper parts or elastomer). Some coatings need a thermal stabilization to avoid any post-treatment deformation.
A hardening treatment is recommended, since it allows an increase in the durability of the Microflon® process.
REFERENCES
THEY TRUST US
CONTACT
INFORMATION • DOCUMENTATION • QUOTES • RECEIVING PARTS • TREATMENT • RETURN SHIPMENT • PICKUPS
2, avenue du Président Salvador Allende
Z.I. Mozinor
93106 MONTREUIL CEDEX
Tel. : 01 48 58 73 13 – Fax : 01 48 58 81 85
contact@fluorotechnique.fr
