Products

OUR PRODUCTS

MICROFLON® PROCESS and CHARACTERISTICS

Surface coatings made by fluoropolymer spraying (Teflon® PTFE, FEP...),
in a wet process, in very thin layers on metallic materials.

The products penetrates into the metal down to a maximal depth of 5 microns
(substrate porosity is obtained mechanically)
on finished pieces without remanufacturing after coating.
The obtained allowance can go from 2 to 30 microns depending on the intended objective.

Application after micro sandblasting to finally obtain pure Teflon coatings, resulting in allowances that start at 3µ+/-1µ. It is even possible to adjust parts with a zero-clearance fit (bushel for aeronautics or space industries).

ADVANTAGES

Problem solving

AUTO LUBRIFICATION

Friction coefficients can fall down to 0.02. The phenomena of bonding, either metal-metal (fretting corrosion), or rubber-metal (stick-slip) in aeronautics and hydraulics are solved.

ELECTRICAL INSULATION

Fluoropolymers can have an electrical insulation function and can also solve galvanic couple problems.

ANTI-ADHESION

MICROFLON® has lubricating and anti-adhesive properties, and it can either be self-sufficient, or complement conventional lubricants.

FRETTING CORROSION

ANTI-CORROSION

FRICTION COEFFICIENT : from 0,03 to 0,15

IMPORTANT
Low-temperature coating is possible (e.g. copper parts or elastomer).
Some coatings need a thermal stabilization to avoid any post-treatment deformation.
A hardening treatment is recommended, since it allows an increase in the durability of the Microflon® process.

The MICROFLON ® department is part of FLUOROTECHNIQUE......
fluorotechnique.com

MICROFLON® remains at your disposal to guide you.